practical images soil stabilising mixer SBF 24 from various construction sites

The power from the tractor's PTO shaft to the cutting rotor is not transmitted, as is usually the case, via power-absorbing side spur gears, but via power belts arranged on both sides, which run at high speed and therefore only have to transmit a relatively low torque. Torque build-up is only achieved via the planetary gear when the torque is needed: in the cutting rotor

Prerequisite is a rear PTO output with 1000 rpm as well as a creeper gear (Vmin=300-500 m /h) or optimally a continuously variable transmission (“CVT”).
For maximum cutting depth even under difficult soil conditions, we recommend 280 HP